| The Surgical Technologist | APRIL 2022 174 15. Michalski MH, Ross JS: The shape of things to come: 3D printing in medicine. JAMA 2014;312:2213-2214. 16. Bizzotto N, Sandri A, Regis D, Romani D, Tami I, Magnan B: Threedimensional printing of bone fractures: A new tangible realistic way for preoperative planning and education. Surg Innov 2015;5:548-551. 17. Kang HJ, Kim BS, Kim SM, et al: Can preoperative 3D printing change surgeon’s operative plan for distal tibia fracture?Biomed Res Int 2019;2019:7059413. 18. Belien H, Biesmans H, Steenwerckx A, Bijnens E, Dierickx C: Prebending of osteosynthesis plate using 3D printed models to treat symptomatic os acromiale and acromial fracture. J Exp Orthop2017; 4:34. 19. Jeong HS, Park KJ, Kil KM, et al: Minimally invasive plate osteosynthesis using 3D printing for shaft fractures of clavicles: Technical note. Arch Orthop Trauma Surg 2014;134:1551-1555. 20. Chung KJ, Huang B, Choi CH, Park YW, Kim HN: Utility of 3D printing for complex distal tibial fractures and malleolar avulsion fractures: Technical tip. Foot Ankle Int 2015;36:1504-1510. 21. Kim HN, Liu XN, Noh KC: Use of a real-size 3D-printed model as a preoperative and intraoperative tool for minimally invasive plating of comminuted midshaft clavicle fractures. J Orthop Surg Res 2015;10:91. 22. Kim JW, Lee Y, Seo J, et al: Clinical experience with threedimensional printing techniques in orthopedic trauma. J Orthop Sci 2018;23:383-388. 23. Ballard D, Mills P, Duszak R, Weisman J, Rybicki F, Woodard P: Medical 3D printing cost-savings in orthopedic and maxillofacial surgery: Cost analysis of operating room time saved with 3D printed anatomic models and surgical guides. Acad Radiol 2020;27: 1103-1113. 24. Wojciechowski E, Chang AY, Balassone D, et al: Feasibility of designing, manufacturing and delivering 3D printed ankle-foot orthoses: A systematic review. J Foot Ankle Res 2019;12:11. 25. Xu R, Wang Z, Ma T, Ren Z, Jin H: Effect of 3D printing individualized ankle-foot orthosis on plantar biomechanics and pain in patients with plantar fasciitis: A randomized controlled trial. Med Sci Monit 2019;25:1392-1400. 26. Diment LE, Thompson MS, Bergmann JH: Three-dimensional printed upper-limb prostheses lack randomised controlled trials: A systematic review. Prosthet Orthot Int 2018;42:7-13. 27. Tanaka KS, Lightdale-Miric N: Advances in 3D-printed pediatric prostheses for upper extremity differences. J Bone Joint Surg Am2016;98: 1320-1326. 28. Trauner KB: The emerging role of 3D printing in arthroplasty and orthopedics. J Arthroplasty 2018;33:2352-2354. 29. Wan L, Wu G, Cao P, Li K, Li J, Zhang S: Curative effect and prognosis of 3D printing titanium alloy trabecular cup and pad in revision of acetabular defect of hip joint. Exp Ther Med 2019;18: 659-663. 30. Hodsden S: FDA clears Zimmer Biomet’s 3D-printed foot and ankle implant. Med Device Online 2016. 31. Serra T, Capelli C, Toumpaniari R, et al: Design and fabrication of 3Dprinted anatomically shaped lumbar cage for intervertebral disc (IVD) degeneration treatment. Biofabrication 2016;8:035001. 32. Mokawem M, Katzouraki G, Harman CL, Lee R: Lumbar interbody fusion rates with 3D-printed lamellar titanium cages using a silicatesubstituted calcium phosphate bone graft. J Clin Neurosci 2019;68: 134-139. 33. Schwarzkopf R, Schnaser E, Nozaki T, Kaneko Y, Gillman MJ: Novel, patient-specific instruments for acetabular preparation and cup placement. Surg Technol Int 2016;29:309-313. 34. Stoffelen DV, Eraly K, Debeer P: The use of 3D printing technology in reconstruction of a severe glenoid defect: A case report with 2.5 years of follow-up. J Shoulder Elbow Surg 2015;24:e218-e222. 35. Kwon OR, Kang KT, Son J, Suh DS, Heo DB, Koh YG: Patientspecific instrumentation development in TKA: 1st and 2nd generation designs in comparison with conventional instrumentation. Arch Orthop Trauma Surg 2017;137:111-118. 36. Stone AH, Sibia US, MacDonald JH: Functional outcomes and accuracy of patient-specific instruments for total knee arthroplasty. Surg Innov 2018;25:470-475. 37. Attard A, Tawy GF, Simons M, Riches P, Rowe P, Biant LC: Health costs and efficiencies of patient-specific and single-use instrumentation in total knee arthroplasty: A randomised controlled trial. BMJ Open Qual 2019;8:e000493. 38. Leon-Munoz V, Martinez-Martinez F, Lopez-Lopez M, SantoniaMedina F: Patient-specific instrumentation in total knee arthroplasty. Expert Rev Med Devices 2019;16:555-567. 39. Shi J, Ly W, Wang Y, et al: Three-dimensional patient-specific cutting guides for closing-wedge distal femoral osteotomy. Int Orthop 2019;43:619-624. 40. Chen X, Zhang G, Lin H, et al: Accurate fixation of plates and screws for the treatment of acetabular fractures using 3D-printed guiding templates: An experimental study. Injury 2017;48: 1147-1154. 41. Rosseels W, Herteleer M, Sermon A, Nijs S, Hoekstra H: Corrective osteotomies using patient-specific 3D-printed guides: A critical appraisal. Eur J Trauma Emerg Surg 2019;45:299-307. 42. Custom Device Exemption: Guidance for Industry and Food and Drug Administration Staff. White Oak, MD, FDA, 2014. 43. Jeng CL, Campbell JT, Tang EY, Cerrato RA, Myerson MS: Tibiotalocalcaneal arthrodesis with bulk femoral head allograft for salvage of large defects in the ankle. Foot Ankle Int 2013;34:1256-1266. 44. Kadakia R, Wixted C, Allen N, Hanselman A, Adams S: Clinical applications of custom 3D printed implants in complex lower extremity reconstruction. 3D Print Med 2020;6:29. 45. Dekker TJ, Steele JR, Federer AE, Hamid KS, Adams SB Jr: Use of patient-specific 3D-printed titanium implants for complex foot and ankle limb salvage, deformity correction, and arthrodesis procedures. Foot Ankle Int 2018;39:916-921. 46. Steele J, Kadakia R, Cunningham D, Dekker T, Kildow B, Adams S: Comparison of 3D printed spherical implants versus femoral head allografts for tibiotalocalcaneal arthrodesis. J Foot Ankle Surg 2020; 59:1167-1170. 47. Nwankwo E, Chen F, Nettles D, Adams S: Five-year follow-up of distal tibia bone and foot and ankle trauma treated with a 3D-printed titanium cage. Case Rep Orthop 2019;2019:7571013. 48. Tracey J, Arora D, Gross CE, Parekh SG: Custom 3D-printed total talar prostheses restore normal joint anatomy throughout the hindfoot. Foot Ankle Spec 2019;12:39-48. 49. Akoh C, Chen J, Adams S: Total ankle total talus replacement using a 3D printed talus component: A case report. J Foot Ankle Surg 2020;59:1306-1312. 50. Ren X, Yang L, Duan XJ: Three-dimensional printing in the surgical treatment of osteoid osteoma of the calcaneus: A case report. J Int Med Res 2017;45:372-380. 51. Xiao JR, Huang WD, Yang XH, et al: En bloc resection of primary malignant bone tumor in the cervical spine based on 3-dimensional printing technology. Orthop Surg 2016;8:171-178. 52. Zhang Y, Wen L, Zhang J, Yan G, Zhou Y, Huang B: Threedimensional printing and computer navigation assisted 10 Journal of the AAOS Global Research & Reviews® ----- April 2021, Vol 5, No 4 ----- © American Academy of Orthopaedic Surgeons Three-dimensional Printing in Orthopaedic Surgery
RkJQdWJsaXNoZXIy MTExMDc1