APRIL 2022 | The Surgical Technologist | 175 hemipelvectomy for en bloc resection of osteochondroma: A case report. Medicine (Baltimore) 2017;96:e6414. 53. Papagelopoulos PJ, Megaloikonomos PD, Korkolopoulou P, Vottis CT, Kontogeorgakos VA, Savvidou OD: Total calcaneus resection and reconstruction using a 3-dimensional printed implant. Orthopedics 2019;42:e282-e287. 54. Papagelopoulos PJ, Sarlikiotis T, Vottis CT, Agrogiannis G, Kontogeorgakos VA, Savvidou OD: Total talectomy and reconstruction using a 3-dimensional printed talus prosthesis for Ewing’s sarcoma: A 3.5-year follow-up. Orthopedics 2019;42: e405-e409. 55. Imanishi J, Choong PF: Three-dimensional printed calcaneal prosthesis following total calcanectomy. Int J Surg Case Rep 2015;10:83-87. 56. Wei R, Guo W, Ji T, Zhang Y, Liang H: One-step reconstruction with a 3D-printed, custom-made prosthesis after total en bloc sacrectomy: A technical note. Eur Spine J 2019;26:1902-1909. 57. Schroeder L, Martin G: In vivo tibial fit and rotational analysis of a customized, patient-specific TKA versus off-the-shelf TKA. J Knee Surg 2019;32:499-505. 58. Culler SD, Martin GM, Swearingen A: Comparison of adverse events rates and hospital cost between customized individually made implants and standard off-the-shelf implants for total knee arthroplasty. Arthroplast Today 2017;3:257-263. 59. Schwarzkopf R, Brodsky M, Garcia GA, Gomoll AH: Surgical and functional outcomes in patients undergoing total knee replacement with patient-specific implants compared with “off-the-shelf” implants. Orthop J Sports Med 2015;3:2325967115590379. 60. Burnard J, Parr WCH, Choy WJ, Walsh WR, Mobbs RJ: 3D-printed spine surgery implants: A systematic review of the efficacy and clinical safety profile of patient-specific and off-the-shelf devices. Eur Spine J 2020;29:1248-1260. 61. Gao G, Cui X: Three-dimensional bioprinting in tissue engineering and regenerative medicine. Biotechnol Lett 2016;38:203-211. 62. Dhawan A, Kennedy PM, Rizk EB, Ozbolat IT: Three-dimensional bioprinting for bone and cartilage restoration in orthopaedic surgery. J Am Acad Orthop Surg 2019;27:e215-e226. 63. Skeldon G, Lucendo-Villarin B, Shu W: Three-dimensional bioprinting of stem-cell derived tissues for human regenerative medicine. Philos Trans R Soc Lond B Biol Sci 2018;373:20170224. 64. Miller JS: The billion cell construct: Will three-dimensional printing get us there? PLoS Biol 2014;12:e1001882. 65. Makris EA, Gomoll AH, Malizos KN, Hu JC, Athanasiou KA: Repair and tissue engineering techniques for articular cartilage. Nat Rev Rheumatol 2015;11:21-34. 66. Nehrer S, Spector M, Minas T: Histologic analysis of tissue after failed cartilage repair procedures. Clin Orthop Relat Res 1999:149-162. 67. Tetteh ES, Bajaj S, Ghodadra NS: Basic science and surgical treatment options for articular cartilage injuries of the knee. J Orthop Sports Phys Ther 2012;42:243-253. 68. Cole BJ, Redondo ML, Cotter EJ: Articular cartilage injuries of the knee: Patient health literacy, expectations for management, and clinical outcomes. Cartilage 2021;12:139-145. 69. Shim JH, Jang KM, Hahn SK, et al: Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint. Biofabrication 2016;8:014102. 70. Xu R, Wang Z, Ren Z, et al: Comparative study of the effects of customized 3D printed insole and prefabricated insole on plantar pressure and comfort in patients with symptomatic flatfoot. Med Sci Monit 2019;25:3510-3519. 71. Wu Y, Kennedy P, Bonazza N, Yu Y, Dhawan A, Ozbolat I: Threedimensional bioprinting of articular cartilage: A systematic review. Cartilage 2021;12:76-92. 72. Zhang L, Yang G, Johnson BN, Jia X: Three-dimensional (3D) printed scaffold and material selection for bone repair. Acta Biomater 2019;84:16-33. 73. Ogose A, Hotta T, Kawashima H, et al: Comparison of hydroxyapatite and beta tricalcium phosphate as bone substitutes after excision of bone tumors. Biomater 2005;72:94-101. 74. Jamroz W, Szafraniec J, Kurek M, Jachowicz R: 3D printing in pharmaceutical and medical applications—Recent achievements and challenges. Pharm Res 2018;35:176. 75. Javaid M, Haleem A: Significant advancements of 4D printing in the field of orthopaedics. J Clin Orthop Trauma 2020;11: 485-490. 76. Wang C, Yue H, Liu J, et al: Advanced reconfigurable scaffolds fabricated by 4D printing for treating critical-size bone defects of irregular shapes. Biofabrication 2020;12:045025. Journal of the AAOS Global Research & Reviews® ----- April 2021, Vol 5, No 4 ----- © American Academy of Orthopaedic Surgeons 11 Review Article Colleen M. Wixted, BS, et al
RkJQdWJsaXNoZXIy MTExMDc1