JUNE 2022 | The Surgical Technologist | 275 of operating room time saved with 3D printed anatomic models and surgical guides,” Academic Radiology, vol. 27, no. 8, pp. 1103–1113, 2020. [19] S. Marconi, L. Pugliese, M. Botti et al., “Value of 3D printing for the comprehension of surgical anatomy,” Surgical Endoscopy, vol. 31, no. 10, pp. 4102–4110, 2017. [20] R. J. Morrison, K. N. Kashlan, C. L. Flanangan et al., “Regulatory considerations in the design and manufacturing of implantable 3D-printed medical devices,” Clinical and Translational Science, vol. 8, no. 5, pp. 594–600, 2015. [21] J. D. Sandt, M. Moudio, J. K. Clark et al., “Stretchable optomechanical fiber sensors for pressure determination in compressive medical textiles,” Advanced Healthcare Materials, vol. 7, no. 15, article 1800293, 2018. [22] I. Gibson and A. Srinath, “Simplifying medical additive manufacturing: making the surgeon the designer,” Procedia Technology, vol. 20, pp. 237–242, 2015. [23] R. R. Edelman, “The history of MR imaging as seen through the pages of radiology,” Radiology, vol. 273, no. 2S, pp. S181–S200, 2014. [24] A. M. Thomas and A. K. Banerjee, The History of Radiology, OUP Oxford, 2013. [25] A. Tahmaseb, V. Wu, D. Wismeijer, W. Coucke, and C. Evans, “The accuracy of static computer-aided implant surgery: a systematic review and meta-analysis,” Clinical Oral Implants Research, vol. 29, pp. 416–435, 2018. [26] C. Gao, C. Wang, H. Jin et al., “Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics,” RSC advances, vol. 8, no. 44, pp. 25210–25227, 2018. [27] T. Kimpe and T. Tuytschaever, “Increasing the number of gray shades in medical display systems—how much is enough?,” Journal of Digital Imaging, vol. 20, no. 4, pp. 422–432, 2007. [28] P. Mildenberger, M. Eichelberg, and E. Martin, “Introduction to the DICOM standard,” European Radiology, vol. 12, no. 4, pp. 920–927, 2002. [29] S. Pieper, M. Halle, and R. Kikinis, “3D Slicer,” in 2004 2nd IEEE international symposium on biomedical imaging: nano to macro (IEEE Cat No. 04EX821), pp. 632–635, Arlington, VA, USA, 2004. [30] S. J. Esses, P. Berman, A. I. Bloom, and J. Sosna, “Clinical applications of physical 3D models derived from MDCT data and created by rapid prototyping,” American Journal of Roentgenology, vol. 196, no. 6, pp. W683–W688, 2011. [31] N. Mohan, P. Senthil, S. Vinodh, and N. Jayanth, “A review on composite materials and process parameters optimisation for the fused deposition modelling process,” Virtual and Physical Prototyping, vol. 12, no. 1, pp. 47–59, 2017. [32] Y.-a. Jin, H. Li, Y. He, and J.-z. Fu, “Quantitative analysis of surface profile in fused deposition modelling,” Additive Manufacturing, vol. 8, pp. 142–148, 2015. [35] R. Velu, T. Calais, A. Jayakumar, and F. Raspall, “A comprehensive review on bio-nanomaterials for medical implants and feasibility studies on fabrication of such implants by additive manufacturing technique,” Materials, vol. 13, no. 1, p. 92, 2020. [36] A. Koptyug, L.-E. Rännar, M. Bäckström, S. Fager Franzén, and P. Dérand, “Additive manufacturing technology applications targeting practical surgery,” International Journal of Life Science and Medical Research, vol. 3, no. 1, pp. 15–24, 2013. [37] H. A. Zaharin, A. M. A. Rani, T. L. Ginta, and F. I. Azam, “Additive manufacturing technology for biomedical components: a review,” IOP Conference Series: Materials Science and Engineering, vol. 328, no. 1, article 012003, 2018. [38] F. P. Melchels, J. Feijen, and D. W. Grijpma, “A review on stereolithography and its applications in biomedical engineering,” Biomaterials, vol. 31, no. 24, pp. 6121–6130, 2010. [39] T. M. Wong, J. Jin, T. W. Lau et al., “The use of threedimensional printing technology in orthopaedic surgery: a review,” Journal of Orthopaedic Surgery, vol. 25, no. 1, 2017. [40] A. Mazzoli, “Selective laser sintering in biomedical engineering,” Medical & Biological Engineering & Computing, vol. 51, no. 3, pp. 245–256, 2013. [41] J. M. Williams, A. Adewunmi, R. M. Schek et al., “Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering,” Biomaterials, vol. 26, no. 23, pp. 4817–4827, 2005. [42] J. W. Choi and N. Kim, “Clinical application of threedimensional printing technology in craniofacial plastic surgery,” Archives of Plastic Surgery, vol. 42, no. 3, p. 267, 2015. [43] L. Murr, E. V. Esquivel, S. A. Quinones et al., “Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V,” Materials Characterization, vol. 60, no. 2, pp. 96–105, 2009. [44] M. Nematollahi, K. S. Baghbaderani, A. Amerinatanzi, H. Zamanian, and M. Elahinia, “Application of NiTi in assistive and rehabilitation devices: a review,” Bioengineering, vol. 6, no. 2, p. 37, 2019. [45] T. Grover, A. Pandey, S. T. Kumari et al., “Role of titanium in bio implants and additive manufacturing: an overview,” Materials Today: Proceedings, vol. 26, pp. 3071–3080, 2020. [46] X. Zhao, S. Li, M. Zhang et al., “Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting,” Materials & Design, vol. 95, pp. 21–31, 2016. [47] S. M. Thompson, L. Bian, N. Shamsaei, and A. Yadollahi, “An overview of direct laser deposition for additive manufacturing; part I: transport phenomena, modeling and diagnostics,” Additive Manufacturing, vol. 8, pp. 36–62, 2015. [48] Y. Li, Y. Hu, W. Cong, L. Zhi, and Z. Guo, “Additive manufacturing of alumina using laser engineered net lameare dic . J. stysis mic 27, ng oslaof nstomals, ive dia ugh 2S, gy, nd ant ral ng cal 44, of is 4, on . 4, [33] D. Espalin, K. Arcaute, D. Rodriguez, F. Medina, M. Posner, and R. Wicker, “Fused deposition modeling of patientspecific polymethylmethacrylate implants,” Rapid Prototyping Journal, vol. 16, no. 3, pp. 164–173, 2010. [34] Q. Chen, J. D. Mangadlao, J. Wallat, A. De Leon, J. K. Pokorski, and R. C. Advincula, “3D printing biocompatible polyurethane/poly (lactic acid)/graphene oxide nanocomposites: anisotropic properties,” ACS Applied Materials & Interfaces, vol. 9, no. 4, pp. 4015–4023, 2017. [35] R. Velu, T. Calais, A. Jayakumar, and F. Raspall, “A comprehensive review on bio-nanomaterials for medical implants and feasibility studies on fabrication of such implants by additive manufacturing technique,” Materials, vol. 13, no. 1, p. 92, 2020. [36] A. Koptyug, L.-E. Rännar, M. Bäckström, S. Fager Franzén, and P. Dérand, “Additive manufacturing technology applications targeting practical surgery,” International Journal of Life Science and Medical Research, vol. 3, no. 1, pp. 15–24, 2013. [37] H. A. Zaharin, A. M. A. Rani, T. L. Ginta, and F. I. Azam, “Additive manufacturing technology for biomedical components: a review,” IOP Conference Series: Materials Science and Engineering, vol. 328, no. 1, article 012003, 2018. [38] F. P. Melchels, J. Feijen, and D. W. Grijpma, “A review on stereolithography and its applications in biomedical engineering,” Biomaterials, vol. 31, no. 24, pp. 6121–6130, 2010. [39] T. M. Wong, J. Jin, T. W. Lau et al., “The use of threedimensional printing technology in orthopaedic surgery: a review,” Journal of Orthopaedic Surgery, vol. 25, no. 1, 2017. [40] A. Mazzoli, “Selective laser sintering in biomedical engineering,” Medical & Biological Engineering & Computing, vol. 51, no. 3, pp. 245–256, 2013. [41] J. M. Williams, A. Adewunmi, R. M. Schek et al., “Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering,” Biomaterials, vol. 26, no. 23, pp. 4817–4827, 2005. [42] J. W. Choi and N. Kim, “Clinical application of threedimensional printing technology in craniofacial plastic surgery,” Archives of Plastic Surgery, vol. 42, no. 3, p. 267, 2015. [43] L. Murr, E. V. Esquivel, S. A. Quinones et al., “Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V,” Materials Characterization, vol. 60, no. 2, pp. 96–105, 2009. [44] M. Nematollahi, K. S. Baghbaderani, A. Amerinatanzi, 19 OUP Oxford, 2013. [25] A. Tahmaseb, V. Wu, D. Wismeijer, W. Coucke, and C. Evans, “The accuracy of static computer-aided implant surgery: a systematic review and meta-analysis,” Clinical Oral Implants Research, v l. 29, pp. 416–435, 2018. [26] C. Gao, C. Wang, H. Jin et al., “Additive manufacturing technique-designed metallic porous impla ts for clinical application in orthopedics,” RSC advances, vol. 8, no. 44, pp. 25210–25227, 2018. [27] T. Kimpe and T. Tuytschaever, “Increasing the number of gray shades in me ical display systems—how much is enough?,” Journal of Digital Imaging, vol. 20, no. 4, p. 422–432, 2007. [28] P. Mildenberger, M. Eichelberg, and E. Martin, “Introduction to the DICOM standard,” European Radiology, vol. 12, no. 4, pp. 920–927, 2002. [29] S. Pieper, M. Halle, and R. Kikinis, “3D Slicer,” in 2004 2nd IEEE intern tional symp sium on biomedical imaging: nano to macro (IEEE Cat No. 04EX821), pp. 632–635, Arlington, VA, USA, 2004. [30] S. J. Esses, P. Berman, A. I. Bloom, and J. Sosna, “Clinical applications of physical 3D models derived from MDCT data and created by rapid prototyping,” American Journal of Roentgenology, vol. 196, n . 6, pp. W683–W688, 2011. [31] N. Mohan, P. Senthil, S. Vino h, and N. Jayanth, “A review on composite materials and rocess parameters optimisation for the fused deposition modelling process,” Virtual a d Physical Prototyping, vol. 12, no. 1, pp. 47–59, 2017. [32] Y.-a. Jin, H. Li, Y. He, and J.-z. Fu, “Quantitative analysis of surface profile in fused deposition modelling,” Additive Manufacturing, vol. 8, pp. 142–148, 2015. ing,” Medical & Biologic l Engineering & Computing, vol. 51, no. 3, pp. 245–256, 2013. [41] J. M. Williams, A. Adewunmi, R. M. Schek et al., “Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering,” Biomaterials, vol. 26, no. 23, pp. 4817–4827, 2005. [42] J. W. Choi and N. Kim, “Clinical application of threedimensional printing technology in craniofacial plastic surgery,” Archives of Plastic Surgery, vol. 42, no. 3, p. 267, 2015. [43] L. Murr, E. V. Esquivel, S. A. Quinones et al., “Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V,” Materials Characterization, vol. 60, no. 2, pp. 96–105, 2009. [44] M. Nematollahi, K. S. Baghbaderani, A. Amerinatanzi, H. Zamanian, and M. Elahinia, “Application of NiTi in assistive and rehabilitation devices: a review,” Bioengineering, vol. 6, no. 2, p. 37, 2019. [45] T. Grover, A. Pandey, S. T. Kumari et al., “Role of titanium in bio implants and additive manufacturing: an overview,” Materials Today: Proceedings, vol. 26, pp. 3071–3080, 2020. [46] X. Zhao, S. Li, M. Zhang et al., “Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melt ng,” Materials & Desi n, vol. 95, pp. 21–31, 2016. [47] S. M. Thompson, L. Bian, N. Shamsaei, and A. Yadollahi, “An overview of direct laser deposition for additive manufacturing; part I: transport phenomena, modeling and diagnostics,” Additive Manufacturing, vol. 8, pp. 36–62, 2015. [48] Y. Li, Y. Hu, W. Cong, L. Zhi, and Z. Guo, “Additive man facturing of alumina using la er engineered net shaping: effects of dep sition variables,” Ceramics Inter ational, vol. 43, no. 10, pp. 7768–7775, 2017. [49] J. Parthasarathy, B. Starly, S. Raman, and A. Christensen, “Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM),” Journal of the Mechanical Behavior of Biomedical Materials, vol. 3, no. 3, pp. 249–259, 2010. [50] Y. Katsuura and S. A. Qureshi, “Additive manufacturing for metal applications in orthopaedic surgery,” JAAOS-Journal of the American Academy of Orthopaedic Surgeons, vol. 28, no. 8, pp. e349–e355, 2020. [51] H. Attar, M. Calin, L. C. Zhang, S. Scudino, and J. Eckert, “Manufacture by selective laser melting and mechanical behavior of commercially pure titanium,” Materials Science and Engineering: A, vol. 593, pp. 170–177, 2014. [52] S. Ghai, Y. Sharma, N. Jain, M. Satpathy, and A. K. Pillai, “Use of 3-D printing technologies in craniomaxillofacial surgery: a review,” Oral and Maxillofacial Surgery, vol. 22, no. 3, pp. 249–259, 2018. [53] T. D. Crafts, S. E. Ellsperman, T. J. Wannemuehler, T. D. Bellicchi, T. Z. Shipchandler, and A. V. Mantravadi, “Threedimensional printing and its applications in otorhinolaryngology–head and neck surgery,” Otolaryngology–Head and Neck Surgery, vol. 156, no. 6, pp. 999–1010, 2017. [54] A. B. V. Pettersson, M. Salmi, P. Vallittu, W. Serlo, J. Tuomi, and A. A. Mäkitie, “Main clinical use of additive manufacturing (three-dimensional printing) in Finland restricted to the head and neck area in 2016-2017,” Scandinavian Journal of Surgery, vol. 109, no. 2, pp. 166–173, 2020. [55] R. M. Zimmerer, E. Ellis III, G. S. Aniceto et al., “A prospective multicenter study to compare the precision of posttraumatic internal orbital reconstruction with standard preformed and individualized orbital implants,” Journal of Cranio-Maxillofacial Surgery, vol. 44, no. 9, pp. 1485– 1497, 2016. [56] M. Rana, C. H. Chui, M. Wagner, R. Zimmerer, M. Rana, and N. C. Gellrich, “Increasing the accuracy of orbital reconstruction with selective laser-melted patient-specific implants combined with intraoperative navigation,” Journal of Oral and Maxillofacial Surgery, vol. 73, no. 6, pp. 1113– 1118, 2015. [57] S. Mazzoni, A. Bianchi, G. Schiariti, G. Badiali, and C. Marchetti, “Computer-aided design and computer-aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning,” Journal of Oral and Maxillofacial Surgery, vol. 73, no. 4, pp. 701– 707, 2015. [58] B. Laure, A. Louisy, A. Joly, N. Travers, A. Listrat, and A. Pare, “Virtual 3D planning of osteotomies for craniosynostoses and complex craniofacial malformations,” Neurochirurgie, vol. 65, no. 5, pp. 269–278, 2019. [59] H. H. Lin, D. Lonic, and L. J. Lo, “3D printing in orthognathic surgery - a literature review,” Journal of the Formosan Medical Association, vol. 117, no. 7, pp. 547–558, 2018. [60] L. G. Mercuri, “The role of custom-made prosthesis for temporomandibular joint replacement,” Revista Española de Cirugía Oral y Maxilofacial, vol. 35, pp. 1–10, 2013. [61] T. Avraham, P. Franco, L. E. Brecht et al., “Functional outcomes of virtually planned free fibula flap reconstruction of the mandible,” Plastic and Reconstructive Surgery, vol. 134, no. 4, pp. 628e–634e, 2014. [62] D. S. Shenaq and E. Matros, “Virtual planning and navigational technology in reconstructive surgery,” Journal of Surgical Oncology, vol. 118, no. 5, pp. 845–852, 2018. [63] R. Nicot, C. Druelle, M. Schlund et al., “Use of 3D printed models in student education of craniofacial traumas,” Dental Traumatology, vol. 35, no. 4-5, pp. 296–299, 2019. [64] C. M. Low, J. M. Morris, J. S. Matsumoto, J. K. Stokken, E. K. O'Brien, and G. Choby, “Use of 3D-printed and 2Dillustrated international frontal sinus anatomy classification anatomic models for resident education,” Otolaryngol Head Neck Surg, vol. 161, no. 4, pp. 705–713, 2019. [65] N. Ayoub, A. Ghassemi, M. Rana et al., “Evaluation of computer-assisted mandibular reconstruction with vascularized iliac crest bone graft compared to conventional surgery: a randomized prospective clinical trial,” Trials, vol. 15, p. 114, 2014. [66] B. M. Dumas, A. Nava, H. Z. Law et al., “Three-dimensional printing for craniofacial surgery: a single institution’s 5-year experience,” The Cleft Palate-Craniofacial Journal, vol. 56, no. 6, pp. 729–734, 2019. [67] A. Berner, M. A. Woodruff, C. X. F. Lam et al., “Effects of scaffold architecture on cranial bone healing,” International Journal of Oral and Maxillofacial Surgery, vol. 43, no. 4, pp. 506–513, 2014. [68] O. Tao, J. Kort-Mascort, Y. Lin et al., “The applications of 3D printing for craniofacial tissue engineering,” Micromachines, vol. 10, no. 7, p. 480, 2019. [69] E. L. Nyberg, A. L. Farris, B. P. Hung et al., “3D-printing technologies for craniofacial rehabilitation, reconstruction, and regeneration,” Annals of Biomedical Engineering, vol. 45, no. 1, pp. 45–57, 2017. [70] W. Clifton, A. Damon, F. Valero-Moreno, E. Nottmeier, and M. Pichelmann, “The SpineBox: a freely available, openaccess, 3D-printed simulator design for lumbar pedicle screw placement,” Cureus, vol. 12, no. 4, pp. e7738–e7738, 2020. [71] A. Damon, W. Clifton, F. Valero-Moreno, and A. QuinonesHinojosa, “Cost-effective method for 3-dimensional printing dynamic multiobject and patient-specific brain tumor models: technical note,” World Neurosurgery, vol. 140, pp. 173–179, 2020. [72] S. S. Panesar, M. Magnetta, D. Mukherjee et al., “Patient-specific 3-dimensionally printed models for neurosurgical planning and education,” Neurosurgical Focus, vol. 47, no. 6, p. E12, 2019. [73] T. Mashiko, K. Otani, R. Kawano et al., “Development of three-dimensional hollow elastic model for cerebral aneurysm clipping simulation enabling rapid and low cost prototyping,” World Neurosurgery, vol. 83, no. 3, pp. 351–361, 2015. [74] N. Kaneko, T. Mashiko, K. Namba, S. Tateshima, E. Watanabe, and K. Kawai, “A patient-specific intracranial aneurysm model with endothelial lining: a novel in vitro approach to bridge the gap between biology andflow dynamics,” Journal of NeuroInterventional Surgery, vol. 10, no. 3, p. 306, 2018. [75] F. Colaguori, M. Marin-Mera, M. McDonnell et al., “ThreeDimensionally Printed Surgical Simulation Tool for Brain Mapping Training and Preoperative Planning,” Operative Neurosurgery, vol. 21, no. 6, pp. 523–532, 2021. [76] J. L. Martinez, A. Damon, R. A. Domingo, F. Valero-Moreno, and A. Quiñones-Hinojosa, “Retrosigmoid craniectomy and 20 BioMed Research International [59] H. H. Lin, D. Lonic, and L. J. Lo, “3D printing in orthognathic surgery - a literature review,” Journal of the Formosan Medical Association, vol. 117, no. 7, pp. 547–558, 2018. [60] L. G. Mercuri, “The role of custom-made prosthesis for temporomandibular joint replacement,” Revista Española de Cirugía Oral y Maxilofacial, vol. 35, pp. 1–10, 2013. [61] T. Avraham, P. Franco, L. E. Brecht et al., “Functional outcomes of virtually planned free fibula flap reconstruction of the mandible,” Plastic and Reconstructive Surgery, vol. 134, no. 4, pp. 628e–634e, 2014. [75] [76] shaping: effects of deposition variab s,” Cera ics Intern - tion l, vol. 43, no. 10, pp. 7768–7775, 2017. [49] J. Parthasarathy, B. Starly, S. Raman, and A. Christensen, “Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM),” Journal of the Mechanical Beh vior of Biomedical Materials, vol. 3, o. 3, pp. 249–259, 2010. [50] Y. Katsuura and S. A. Qureshi, “Additive manufacturing for metal applications in orthopaedic surgery,” JAAOS-Journal of the American Academy of Orthopaedic Surgeons, vol. 28, no. 8, pp. e349–e355, 2020. [51] H. Attar, M. Calin, L. C. Zhang, S. Scudino, and J. Eckert, “Manufacture by selective laser melting and mechanical behavior of commercially pure titanium,” Materials Science and Engineering: A, vol. 593, pp. 170–177, 2014. [52] S. Ghai, Y. Sharma, N. Jain, M. Satpathy, and A. K. Pillai, “Use of 3-D printing technologies in craniomaxillofacial surgery: a review,” Oral and Maxillofacial Surgery, vol. 22, no. 3, pp. 249–259, 2018. [53] T. D. Crafts, S. E. Ellsperman, T. J. Wannemuehler, T. D. Bellicchi, T. Z. Shipchandler, and A. V. Mantravadi, “Threedimensional printing and its applications in otorhinolaryngology–head and neck surgery,” Otolaryngology–Head and Neck Surgery, vol. 156, no. 6, pp. 999–1010, 2017. [54] A. B. V. Pettersson, M. Salmi, P. Vallittu, W. Serlo, J. Tuomi, and A. A. Mäkitie, “Main clinical use of additive manufacturing (three-dimensional printing) in Finland restricted to the head and neck area in 2016-2017,” Scandinavian Journal of Surgery, vol. 109, no 2, pp. 166–173, 2020. [55] R. M. Zimmerer, E. Ellis III, G. S. Aniceto et al., “A prospective multicenter study to compare the precision of posttraumatic internal orbital reconstruction with standard preformed and individualized orbital impla ts,” Journal of Cranio-M xillofacial Surgery, vol. 44, o. 9, pp. 1485– 1497, 2016. [56] M. Rana, C. H. Chui, M. Wagner, R. Zimmerer, M. Rana, and N. C. Gellrich, “Increasing the accur cy of orbita reconstruction with sele tive laser-melted patient-specific implants combined with intr operative navi ation,” Jour al of Oral and Maxillofacial Surgery, vol. 73, no. 6, pp. 1113– 1118, 2015. [57] S. Mazzoni, A. Bianchi, G. Schiariti, G. Badiali, and C. Marchetti, “Computer-aided design and computer-aided manufacturing cutting guides and customized titanium plates are useful in upper maxilla waferless repositioning,” Journal of Oral and Maxillofacial Surgery, vol. 73, no. 4, pp. 701– 707, 2015. [58] B. Laure, A. Loui y, A. Joly, N. Travers, A. Listrat, and A. P re, “Virtual 3D planning of osteotom es for craniosynostos s and complex craniofacial malformations,” Neurochirurgie, vol. 65, no. 5, pp. 269–278, 2019. [59] H. H. L n, D. Lonic, and L. J. Lo, “3D printing in orthognathic surgery - a literatur review,” Jou nal of the F rmosan Me ical Association, vol. 117, no. 7, pp. 547–558, 2018. [60] L. G. Mercuri, “The role of custom-made prosthesis for temporomandibular joint replacement,” Revista Española de Cirugía Or l y Maxilofacial, vol. 35, pp. 1–10, 2013. [61] T. Avraham, P. Franco, L. E. Brecht et al., “Functional outcomes of virtually planned free fibula flap reconstruction of the mandible,” Plastic and Reconstructive Surgery, vol. 134, no. 4, pp. 628e–634e, 2014. [62] D. S. Shenaq and E. Matros, “Virtual planning and navigational technology in reconstructive surgery,” Journal of Surgical Oncology, vol. 118, no. 5, pp. 845–852, 2018. [63] R. Nicot, C. Druelle, M. Schlund et al., “Use of 3D printed models in student education of craniofacial traumas,” Dental Traumatology, vol. 35, no. 4-5, pp. 296–299, 2019. [64] C. M. Low, J. M. Morris, J. S. Matsumoto, J. K. Stokken, E. K. O'Brien, and G. Choby, “Use of 3D-printed and 2Dillustrated international frontal sinus anatomy classification anatomic models for resident education,” Otolaryngol Head Neck Surg, vol. 161, no. 4, pp. 705–713, 2019. [65] N. Ayoub, A. Ghassemi, M. Rana et al., “Evaluation of computer-assisted mandibular reconstruction with vascularized iliac crest bone graft compared to conventional surgery: a randomized prospective clinical trial,” Trials, vol. 15, p. 114, 2014. [66] B. M. Dumas, A. Nava, H. Z. Law et al., “Three-dimensional printing for craniofacial surgery: a single institution’s 5-year experience,” The Cleft Palate-Craniofacial Journal, vol. 56, no. 6, pp. 729–734, 2019. [67] A. Berner, M. A. Woodruff, C. X. F. Lam et al., “Effects of scaffold architecture on cranial bone healing,” International Journal of Oral and Maxillofacial S rgery, vol. 43, no. 4, pp. 506–513, 2014. [68] O. Tao, J. Kort-Mascort, Y. Lin et al., “The applications of 3D printing for craniofacial tissue engineering,” Micromachines, vol. 10, no. 7, p. 480, 2019. [69] E. L. Nyberg, A. L. Farris, B. P. Hung et al., “3D-printing technologies for craniofacial rehabilitati n, reconstruction, and regeneration,” Annals of Biomedical Engineering, vol. 45, no. 1, pp. 45–57, 2017. [70] W. Clifton, A. Damon, F. Valero-Moreno, E. Nottmeier, and M. Pichelmann, “The SpineBox: fre ly available, ope - ac ess, 3D-printed si ulator design for lumbar pedicle screw placement,” Cureus, vol. 12, no. 4, pp. e7738– 7738, 2020. [71] A. Damon, W. Clifton, F. Valero-Moreno, and A. QuinonesHinojosa, “Cost-effective method for 3-dimensional printing dynamic ultiobject and patient-specific brain tum r models: technic l note,” World Neurosurgery, vol. 140, pp. 173–179, 2020. [72] S. S. Panesar, M. Magnetta, D. Mukherjee et al., “Patient-specific 3-dimensionally printed models for neurosurgical planning an education,” Neurosurgical Focus, vol. 47, o. 6, p. E12, 2019. [73] T. Mashiko, K. Otani, R. Kawano et al., “Development of three-dimensi nal hollow elastic model for cerebral aneurysm clipping simulation enabling rapid a d low cost prototyping,” W rld Neurosurgery, vol. 83, no. 3, pp. 351–361, 2015. [74] N. Kaneko, T. Mashiko, K. Namba, S. Tateshim , E. Watan be, and K. Kawai, “A patient-specific intracranial aneurysm model with endothelial lining: a novel in vitro approach t bridge the gap betw en bi logy andfl w dynamics,” Journal of NeuroInterve tional Surg r , vol. 10, no. 3, p. 306, 2018. [75] F. Colaguori, M. Marin-Mera, M. McDonnell et al., “ThreeDimensionally Printed Surgical Simulation Tool for Brain Mapping Training and Preoperative Planning,” Operative Neurosurgery, vol. 21, no. 6, pp. 523–532, 2021. [76] J. L. Martinez, A. Damon, R. A. Domingo, F. Valero-M reno, and A. Quiñones-Hinojosa, “Retrosigmoid craniectomy and 20 BioMed Research International suprameatal drilling-3-dimensionally printed microneurosurgical simulation: 2-dimensional operative video,” Operative Neurosurgery, v l. 21, no. 4, pp. E355–E356, 2021. [77] A. C. Weber, F. Henderson, J. M. Santos, and A. M. Spiotta, “Letter: for whom the bell tolls: overcoming th challenges of t e COVID pa demic as a residency program,” Neurosurge , vol. 87, o. 2, p. E207, 2020. [78] P. D. Patel, K. A. Kelly, R. A. Reynolds et al., “Tracking the volume of neurosurgical care during the coronavirus disease 2019 Pand mic,” World neurosurgery, vol. 142, pp. e183– e194, 2020. [79] M. Randazzo, J. M. Pisapia, N. Singh, and J. P. Thawani, “3D printing in neurosurgery: a systematic review,” Surgical Neurology International, vol. 7, Supplement 33, pp. S801–S809, 2016. [80] A. A. Dmytriw, J. L. Martinez, J. Spears, and T. R. Marotta, “Cerebral aneurysm debuting as rupture during diagnostic CT angiography: an unexpected worst-case scenario,” The Neuroradiology Journal, vol. 29, no. 3, pp. 216–218, 2016. [81] A. Gunasekaran, J. M. Santos, and W. A. Vandergrift 3rd, “Supraorbital craniotomy for sellar solitary fibrous tu or: operative technique and literature review,” World Neurosurgery, vol. 141, pp. 395–401, 2020. [82] J. L. Martinez and R. L. Macdonald, “Surgical strategies for acutely ruptured arteriovenous malformations,” New Insights in Intracerebral Hemorrhage, vol. 37, pp. 166–181, 2015. [92] [93] [94] [95] [96] [97] [98] [99] BioMed Research International
RkJQdWJsaXNoZXIy MTExMDc1