JUNE 2022 | The Surgical Technologist | 279 [260] L. Meseguer-Olmo, V. Vicente-Ortega, M. Alcaraz-Baños et al., “In-vivo behavior of Si-hydroxyapatite/polycaprolactone/DMB scaffolds fabricated by 3D printing,” Journal of Biomedical Materials Research Part A, vol. 101, no. 7, pp. 2038–2048, 2013. [261] J. C. Reichert, A. Cipitria, D. R. Epari et al., “A tissue engineering solution for segmental defect regeneration in loadbearing long bones,” Science translational medicine, vol. 4, no. 141, p. 141ra93, 2012. [262] R. Vaishya, V. Vijay, A. Vaish, and A. K. Agarwal, “Threedimensional printing for complex orthopedic cases and trauma: a blessing,” Apollo Medicine, vol. 15, no. 2, p. 51, 2018. [263] Z. A. Starosolski, J. H. Kan, S. D. Rosenfeld, R. Krishnamurthy, and A. Annapragada, “Application of 3D printing (rapid prototyping) for creating physical models of pediatric orthopedic disorders,” Pediatric radiology, vol. 44, no. 2, pp. 216–221, 2014. [264] O. Cartiaux, L. Paul, B. G. Francq, X. Banse, and P.- L. Docquier, “Improved accuracy with 3D planning and patient-specific instruments during simulated pelvic bone tumor surgery,” Annals of biomedical engineering, vol. 42, no. 1, pp. 205–213, 2014. [265] N. Herbert, D. Simpson, W. D. Spence, and W. Ion, “A preliminary investigation into the development of 3-D printing of prosthetic sockets,” Journal of Rehabilitation Research & Development, vol. 42, no. 2, 2005. [266] L. H. Hsu, G. Huang, C. Lu, D. Hong, and S. Liu, “The development of a rapid prototyping prosthetic socket coated with a resin layer for transtibial amputees,” Prosthetics and orthotics international, vol. 34, no. 1, pp. 37–45, 2010. [267] C. Mavroidis, R. G. Ranky, M. L. Sivak et al., “Patient specific ankle-foot orthoses using rapid prototyping,” Journal of NeuroEngineering and Rehabilitation, vol. 8, no. 1, p. 1, 2011. 2020. [275] L. M. Wellens, J. Meulstee, C. P. van de Ven et al., “Comparison of 3-dimensional and augmented reality kidney models with conventional imaging data in the preoperative assessment of children with Wilms tumors,” JAMA network open, vol. 2, no. 4, article e192633, 2019. [276] N. Wake, M. A. Bjurlin, P. Rostami, H. Chandarana, and W. C. Huang, “Three-dimensional printing and augmented reality: enhanced precision for robotic assisted partial nephrectomy,” Urology, vol. 116, pp. 227-228, 2018. [277] J. H. Shuhaiber, “Augmented reality in surgery,” Archives of surgery, vol. 139, no. 2, pp. 170–174, 2004. [278] R. Moreta-Martinez, J. A. Calvo-Haro, L. Mediavilla-Santos, R. Pérez-Mañanes, and J. Pascau, “Combining augmented reality and 3D printing to improve surgical workflows in orthopedic oncology: smartphone application and clinical evaluation,” Sensors, vol. 21, no. 4, p. 1370, 2021. [279] R. Moreta Martínez, D. García Mato, M. García Sevilla, R. Pérez Mañanes, J. A. Calvo Haro, and J. P. G. Garzón, “Combining augmented reality and 3D printing to display patient models on a smartphone,” JoVE (Journal of Visualized Experiments), vol. 155, article e60618, 2020. [280] C. Moro, J. Smith, and Z. Stromberga, “Multimodal learning in health sciences and medicine: merging technologies to enhance student learning and communication,” in Biomedical visualisation, pp. 71–78, Springer, 2019. [281] D. M. Costello, I. Huntington, G. Burke et al., “A review of simulation training and new 3D computer-generated synthetic organs for robotic surgery education,” Journal of Robotic Surgery, pp. 1–15, 2021. [282] D. M. Hilty, K. Randhawa, M. M. Maheu et al., “A review of telepresence, virtual reality, and augmented reality applied to clinical care,” Journal of Technology in Behavioral Science, vol. 5, no. 2, pp. 178–205, 2020. 3, nd es e, ne: al 5– p: al, eid ero2_ n, n4, os cof 7, id4, end 1, d, 3ls y, P.- nd ne 2, eng & la cs fic u- [268] A. Haleem, M. Javaid, and R. Vaishya, “5D printing and its expected applications in orthopaedics,” Journal of clinical orthopaedics and trauma, vol. 10, no. 4, p. 809, 2019. [269] W. S. Khor, B. Baker, K. Amin, A. Chan, K. Patel, and J. Wong, “Augmented and virtual reality in surgery—the digital surgical environment: applications, limitations and legal pitfalls,” Annals of translational medicine, vol. 4, no. 23, 2016. [270] J. Sutherland, J. Belec, A. Sheikh et al., “Applying modern virtual and augmented reality technologies to medical images and models,” Journal of digital imaging, vol. 32, no. 1, pp. 38–53, 2019. [271] D. B. Jones, R. Sung, C. Weinberg, T. Korelitz, and R. Andrews, “Three-dimensional modeling may improve surgical education and clinical practice,” Surgical Innovation, vol. 23, no. 2, pp. 189–195, 2016. [272] K. A. Abdullah and W. Reed, “3D printing in medical imaging and healthcare services,” Journal of medical radiation sciences, vol. 65, no. 3, pp. 237–239, 2018. [273] S. Ammanuel, I. Brown, J. Uribe, and B. Rehani, “Creating 3D models from radiologic images for virtual reality medical education modules,” Journal of medical systems, vol. 43, no. 6, pp. 1–3, 2019. [274] N. Wake, J. E. Nussbaum, M. I. Elias, C. V. Nikas, and M. A. Bjurlin, “3D printing, augmented reality, and virtual reality for the assessment and management of kidney and prostate cancer: a systematic review,” Urology, vol. 143, pp. 20–32, 2020. [275] L. M. Wellens, J. Meulstee, C. P. van de Ven et al., “Comparison of 3-dimensional and augmented reality kidney models with conventional imaging data in the preoperative assessment of children with Wilms tumors,” JAMA network open, vol. 2, no. 4, article e192633, 2019. [276] N. Wake, M. A. Bjurlin, P. Rostami, H. Chandarana, and W. C. Huang, “Three-dimensional printing and augmented reality: enhanced precision for robotic assisted partial nephrectomy,” Urology, vol. 116, pp. 227-228, 2018. [277] J. H. Shuhaiber, “Augmented reality in surgery,” Archives of surgery, vol. 139, no. 2, pp. 170–174, 2004. [278] R. Moreta-Martinez, J. A. Calvo-Haro, L. Mediavilla-Santos, R. Pérez-Mañanes, and J. Pascau, “Combining augmented reality and 3D printing to improve surgical workflows in orthopedic oncology: smartphone application and clinical evaluation,” Sensors, vol. 21, no. 4, p. 1370, 2021. [279] R. Moreta Martínez, D. García Mato, M. García Sevilla, R. Pérez Mañanes, J. A. Calvo Haro, and J. P. G. Garzón, “Combining augmented reality and 3D printing to display patient models on a smartphone,” JoVE (Journal of Visualized Experiments), vol. 155, article e60618, 2020. [280] C. Moro, J. Smith, and Z. Stromberga, “Multimodal learning in health sciences and medicine: merging technologies to enhance student learning and communication,” in Biomedical visualisation, pp. 71–78, Springer, 2019. [281] D. M. Costello, I. Huntington, G. Burke et al., “A review of simulation training and new 3D computer-generated synthetic organs for robotic surgery education,” Journal of Robotic Surgery, pp. 1–15, 2021. [282] D. M. Hilty, K. Randhawa, M. M. Maheu et al., “A review of telepresence, virtual reality, and augmented reality applied to clinical care,” Journal of Technology in Behavioral Science, vol. 5, no. 2, pp. 178–205, 2020. 27 tumor surgery,” Annals of biomedical engineering, vol. 42, no. 1, pp. 205–213, 2014. [265] N. Herbert, D. Simpson, W. D. Spence, and W. Ion, “A preliminary investigation into the development of 3-D printing of prosthetic sockets,” Journal of Rehabilitation Research & Development, vol. 42, no. 2, 2005. [266] L. H. Hsu, G. Huang, C. Lu, D. Hong, and S. Liu, “The devel opment f a rapid prototyping pro thetic sock t coat d with a resin layer for transtibial amputees,” Prosthetics and orthotics international, vol. 34, no. 1, pp. 37–45, 2010. [267] C. Mavr idis, R. G. Ranky, M. L. Sivak e al., “Patient specific ankle-foot orthoses using rapid prototyping,” Journal of NeuroEngineering and Rehabilitation, vol. 8, no. 1, p. 1, 2011. ized Experiments), vol. 155, article e60618, 2020. 80 C. oro, J. Smith, and Z. Stromberga, “Multimodal learning in health sci ces nd medicin : me ging tech ologies to en ance stude t earning and communicati n,” in Biom dical visualisatio , pp. 71–78, Springer 2019. [281] D. M. Costello, I. Huntington, G. Burke et al., “A review of simul tion training and new 3D computer-gene ted synthetic organs for robotic surgery educatio ,” Journal of Robotic Surgery, pp. 1–15, 2021. [282] D. M. Hilty, K. Randhawa, M. M. Maheu et al., “A review of telepresence, virtual reality, and augmented reality applied to clinical care,” Journal of Technology in Behavioral Science, vol. 5, no. 2, pp. 178–205, 2020. [283] G. Sampogn , R. Pugliese, M. Elli, A. Vanzulli, an A. Forgione, “Routine clinical application of virtual real ty in abdominal surgery,” Minimally Invas ve Ther py & Allied Technol gies, vol. 26, no. 3, pp. 135–14 , 2017. 84 S S. Panesar nd K. Ashkan, “Surgery in space,” BJS (Br tish Journal of Surgery), vol. 105, n . 10, pp. 1234–1243, 2018. [285] T. Haidegger, J. Sándor, and Z. Benyó, “Surgery in space: the future of robotic telesurgery,” Surgical endoscopy, vol. 25, no. 3, pp. 681–690, 2011. [286] NASA, NASA Space Flight Human-System Standard Volume 1, Revision A: Crew Health, NASA, 2014, https://standards .nasa.gov/human-factors-and-health. [287] M. Komorowski, S. Fleming, M. Mawkin, and J. Hinkelbein, “Anaesthesia in austere environments: literature review and considerations for future space exploration missions,” npj Microgravity, vol. 4, no. 1, p. 5, 2018. [288] D. Pantalone, G. S. Faini, F. Cialdai et al., “Robot-assisted surgery in space: pros and cons. A review from the surgeon’s point of view,” npj Microgravity, vol. 7, no. 1, p. 56, 2021. [289] T. Russomano, S. N. Evetts, J. Castro et al., “A device for sampling arterialized earlobe blood in austere environments,” Aviation, space, and environmental medicine, vol. 77, no. 4, pp. 453–455, 2006. [290] S. Rajput, “A review of space surgery - what have we achieved, current challenges, and future prospects,” Acta Astronautica, vol. 188, pp. 18–24, 2021. 28 BioMed Research International C E E X A M Earn CE Credits at Home You will be awarded continuing education (CE) credits toward your recertification after reading the designated article and completing the test with a score of 70%or better. If youdonot pass the test, it will be returned along with your payment. Send the original answer sheet from the journal and make a copy for your records. If possible use a credit card (debit or credit) for payment. It is a faster option for processing of credits and offers more flexibility for correct payment. When submitting multiple tests, you do not need to submit a separate check for each journal test. You may submit multiple journal tests with one check or money order. Members this test is also available online at www.ast.org. No stamps or checks and it posts to your record automatically! Members: $6 per credit (per credit not per test) Nonmembers: $10 per credit (per credit not per test plus the $400 nonmember fee per submission) After your credits are processed, AST will send you a letter acknowledging the number of credits that were accepted. Members can also check your CE credit status online with your login information at www.ast.org. 3 WAYS TO SUBMIT YOUR CE CREDITS Mail to: AST, Member Services, 6 West Dry Creek Circle Ste 200, Littleton, CO 80120-8031 Fax CE credits to: 303-694-9169 E-mail scanned CE credits in PDF format to: [email protected] For questions please contact Member Services - [email protected] or 800-637-7433, option 3. Business hours: Mon-Fri, 8:00a.m. - 4:30 p.m., MT
RkJQdWJsaXNoZXIy MTExMDc1