| The Surgical Technologist | JUNE 2022 278 [202] H. W. Schreuder, R. Wolswijk, R. P. Zweemer, M. P. Schijven, and R. H. Verheijen, “Training and learning robotic surgery, time for a more structured approach: a systematic review,” BJOG: An International Journal of Obstetrics & Gynaecology, vol. 119, no. 2, pp. 137–149, 2012. [203] A. Ghazi, T. Campbell, R. Melnyk et al., “Validation of a fullimmersion simulation platform for percutaneous nephrolithotomy using three-dimensional printing technology,” Journal of endourology, vol. 31, no. 12, pp. 1314–1320, 2017. [204] M. M. Maddox, A. Feibus, J. Liu, J. Wang, R. Thomas, and J. L. Silberstein, “3D-printed soft-tissue physical models of renal malignancies for individualized surgical simulation: a feasibility study,” Journal of robotic surgery, vol. 12, no. 1, pp. 27–33, 2018. [205] C. L. Cheung, T. Looi, T. S. Lendvay, J. M. Drake, and W. A. Farhat, “Use of 3-dimensional printing technology and silicone modeling in surgical simulation: development and face validation in pediatric laparoscopic pyeloplasty,” Journal of surgical education, vol. 71, no. 5, pp. 762–767, 2014. [206] R. F. Youssef, K. Spradling, R. Yoon et al., “Applications of three-dimensional printing technology in urological practice,” BJU international, vol. 116, no. 5, pp. 697–702, 2015. [207] F. Adams, T. Qiu, A. Mark et al., “Soft 3D-printed phantom of the human kidney with collecting system,” Annals of biomedical engineering, vol. 45, no. 4, pp. 963–972, 2017. [208] A. Golab, T. Smektala, K. Kaczmarek, R. Stamirowski, M. Hrab, and M. Slojewski, “Laparoscopic partial nephrectomy supported by training involving personalized silicone replica poured in three-dimensional printed casting mold,” Journal of Laparoendoscopic & Advanced Surgical Techniques, vol. 27, no. 4, pp. 420–422, 2017. [209] T. G. Manning, J. S. O’Brien, D. Christidis et al., “Three dimensional models in uro-oncology: a future built with additive fabrication,” World journal of urology, vol. 36, no. 4, pp. 557–563, 2018. [216] J. Cla in and S. A. Waits, “Three dimensionally printed interactive training model for kidney transplantation,” Journal of surgical education, vol. 77, no. 5, pp. 1013–1017, 2020. [217] P. Saba, E. Belfast, R. Melnyk, A. Patel, R. Kashyap, and A. Ghazi, “Development of a high-fidelity robot-assisted kidney transplant simulation platform using three-dimensional printing and hydrogel casting technologies,” Journal of Endourology, vol. 34, no. 10, pp. 1088–1094, 2020. [218] H. H. Bendre, A. Rajender, P. V. Barbosa, and S. E. Wason, “Robotic dismembered pyeloplasty surgical simulation using a 3D-printed silicone-based model: development, face validation and crowdsourced learning outcomes assessment,” Journal of robotic surgery, vol. 14, no. 6, pp. 897–902, 2020. [219] J.-C. Bernhard, S. Isotani, T. Matsugasumi et al., “Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education,” World journal of urology, vol. 34, no. 3, pp. 337–345, 2016. [220] S. M. Falzarano, M. Zhou, A. V. Hernandez, A. S. Moussa, J. S. Jones, and C. Magi-Galluzzi, “Can saturation biopsy predict prostate cancer localization in radical prostatectomy specimens: a correlative study and implications for focal therapy,” Urology, vol. 76, no. 3, pp. 682–687, 2010. [221] Y. Komai, Y. Sakai, N. Gotohda, T. Kobayashi, S. Kawakami, and N. Saito, “A novel 3-dimensional image analysis system for case-specific kidney anatomy and surgical simulation to facilitate clampless partial nephrectomy,” Urology, vol. 83, no. 2, pp. 500–506, 2014. [222] F. Porpiglia, R. Bertolo, E. Checcucci et al., “Development and validation of 3D printed virtual models for robotassisted radical prostatectomy and partial nephrectomy: urologists' and patients' perception,” World journal of urology, vol. 36, no. 2, pp. 201–207, 2018. [223] F. Porpiglia, D. Amparore, E. Checcucci et al., “Current use of three-dimensional model technology in urology: a road map for personalised surgical planning,” European urology focus, vol. 4, no. 5, pp. 652–656, 2018. thy, ters colvagand and magove The 602, and s as xual ical ner, aneus, no, intstirs,” ven, ery, w,” ogy, ullhrogy,” 017. and s of n: a . 1, . A. siliace l of s of rac5. om bioski, recone ld,” echhree with 36, [210] M. Kusaka, M. Sugimoto, N. Fukami et al., “Initial experience with a tailor-made simulation and navigation program using a 3-D printer model of kidney transplantation surgery,” Transplantation Proceedings, vol. 47, no. 3, pp. 596–599, 2015. [211] B. C. Özgür and A. Ayyıldız, “3D printing in urology: is it really promising?,” Turkish Journal of Urology, vol. 44, no. 1, pp. 6–9, 2018. [212] H. A. Atalay, H. L. Canat, V. Ülker, İ. Alkan, Ü. Özkuvanci, and F. Altunrende, “Impact of personalized threedimensional (3D) printed pelvicalyceal system models on patient information in percutaneous nephrolithotripsy surgery: a pilot study,” International Brazilian Journal of Urology, vol. 43, pp. 470–475, 2017. [213] N. Wake, T. Rude, S. K. Kang et al., “3D printed renal cancer models derived from MRI data: application in pre-surgical planning,” Abdominal Radiology, vol. 42, no. 5, pp. 1501– 1509, 2017. [214] A. Golab, M. Slojewski, M. Brykczynski et al., “Three-dimensional printing as an interdisciplinary communication tool: preparing for removal of a giant renal tumor and atrium neoplastic mass,” The heart surgery forum, vol. 19, no. 4, pp. E185–E186, 2016. [215] Z. Sun and D. Liu, “A systematic review of clinical value of three-dimensional printing in renal disease,” Quantitative imaging in medicine and surgery, vol. 8, no. 3, p. 311, 2018. [216] J. Claflin and S. A. Waits, “Three dimensionally printed interactive training model for kidney transplantation,” Journal of surgical education, vol. 77, no. 5, pp. 1013–1017, 2020. [217] P. Saba, E. Belfast, R. Melnyk, A. Patel, R. Kashyap, and A. Ghazi, “Development of a high-fidelity robot-assisted kidney transplant simulation platform using three-dimensional printing and hydrogel casting technologies,” Journal of Endourology, vol. 34, no. 10, pp. 1088–1094, 2020. [218] H. H. Bendre, A. Rajender, P. V. Barbosa, and S. E. Wason, “Robotic dismembered pyeloplasty surgical simulation using a 3D-printed silicone-based model: development, face validation and crowdsourced learning outcomes assessment,” Journal of robotic surgery, vol. 14, no. 6, pp. 897–902, 2020. [219] J.-C. Bernhard, S. Isotani, T. Matsugasumi et al., “Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education,” World journal of urology, vol. 34, no. 3, pp. 337–345, 2016. [220] S. M. Falzarano, M. Zhou, A. V. Hernandez, A. S. Moussa, J. S. Jones, and C. Magi-Galluzzi, “Can saturation biopsy predict prostate cancer localization in radical prostatectomy specimens: a correlative study and implications for focal therapy,” Urology, vol. 76, no. 3, pp. 682–687, 2010. [221] Y. Komai, Y. Sakai, N. Gotohda, T. Kobayashi, S. Kawakami, and N. Saito, “A novel 3-dimensional image analysis system for case-specific kidney anatomy and surgical simulation to facilitate clampless partial nephrectomy,” Urology, vol. 83, no. 2, pp. 500–506, 2014. [222] F. Porpiglia, R. Bertolo, E. Checcucci et al., “Development and validation of 3D printed virtual models for robotassisted radical prostatectomy and partial nephrectomy: urologists' and patients' perception,” World journal of urology, vol. 36, no. 2, pp. 201–207, 2018. [223] F. Porpiglia, D. Amparore, E. Checcucci et al., “Current use of three-dimensional model technology in urology: a road map for personalised surgical planning,” European urology focus, vol. 4, no. 5, pp. 652–656, 2018. 25 tice,” BJU international, vol. 116, no. 5, pp. 697–702, 2015. [207] F. Adams, T. Qiu, A. Mark et al., “Soft 3D-printed phantom of the human kidney with collecting system,” Ann ls of biomedical engineeri g, v l. 45, no. 4, pp. 963–972, 2017. [208] A. Golab, T. Smektala, K. Kaczmarek, R. Stamirowski, M. Hrab, and M. Sloj wski, “Laparoscopic parti l nephrectomy supp rted by trai ing involving personalized silicone replica poured i three-dimensional printed casting m ld,” Journal of Laparoendoscopic & Advanced Surgical Techniques, vol. 27, no. 4, pp. 420–422, 2017. [209] T. G. Manning, J. S. O’Brien, D. Christidis et al., “Three dimension l models in uro-oncology: a future built with additive fabrication,” World journal of urology, vol. 36, no. 4, pp. 557–563, 2018. [221] Y. Komai, Y. Sakai, N. Gotohda, T. Kobayashi, S. Kawakami, and N. Saito, “A novel 3-dimensional image analysis system for case-specific kidney anatomy and surgical simulation to facilitate clampless partial nephrectomy,” Urology, vol. 83, no. 2, pp. 500–506, 2014. [222] F. Porpiglia, R. Bertol , E. Checcucci et al., “Devel pment and validation of D printed virtual models for robotassisted radical prostatectomy and partial nephrectomy: urologists' and patients' perception,” World journal of urology, vol. 36, no. 2, pp. 201–207, 2018. [223] F. P rpiglia, D. Amparore, E. Checcucci et al., “Current use f three-dimensional model technology in urology: a road map for personalised surgical planning,” European urology focus, vol. 4, no. 5, pp. 652–656, 2018. [224] Y. S liman, A. H. Feibus, and N. Baum, “3D printin and its urologic applications,” Reviews in urology, vol. 17, no. 1, pp. 20–24, 2015. [225] M. Colaco, D. A. Igel, and A. Atala, “The pote tial of 3D printing in urological research a d patient care,” Nature Reviews Urology, vol. 15, no. 4, pp. 213–221, 2018. [226] V. Lemarteleur, M. Peycel n, J.-L. Sablayrolles, P. Plaisance, A. El-Ghoneimi, and P.-F. Ceccaldi, “Realization of open software chain for 3D modeling and pr nting of organs in simulation centers: example of renal pelvis reconstr ction,” Journal of Surgical Education, vol. 78, no. 1, pp. 232–244, 2021 [227] D. M. Cheriachan, M. DiPaola, J. P. Ianno ti, and E. T. Ricchetti, “3D printing in orthopedics—upper extremity arthropl sty,” in 3D printing in orthopae ic surgery, pp. 151–169, Elsevier, 2019. [228] D. Santoro, S. Tantavisut, D. Aloj, and M. D. Karam, “Diaphyseal osteotomy after ost-traumatic malalignment,” Current reviews in usculoskeletal medicine, vol. 7, no. 4, pp. 312– 322, 2014. [229] J. Miyake, T. Murase, K. Oka, H. Moritomo, K. Sugamoto, and H. Yoshikawa, “Computer-assisted corrective osteotomy for malunited diaphyseal forearm fractures,” JBJS, vol. 94, no. 20, p. e150, 2012. [230] D. A. Storelli, A. S. Bauer, L. L. Lattanza, and H. R. McCarroll, “The use of computer-aided design and 3-dimensional models in the treatment of forearm malunions in children,” Techniques in hand & upper extremity surgery, vol. 19, no. 1, pp. 23–26, 2015. [231] S. P. Steinmann and J. E. Adams, “Scaphoid fractures and nonunions: diagnosis and treatment,” Journal of Orthopaedic Science, vol. 11, no. 4, pp. 424–431, 2006. [232] A. Schweizer, F. Mauler, L. Vlachopoulos, L. Nagy, and P. Fürnstahl, “Computer-assisted 3-dimensional reconstructions of scaphoid fractures and nonunions with and without the use of patient-specific guides: early clinical outcomes and postoperative assessments of reconstruction accuracy,” The Journal of Hand Surgery, vol. 41, no. 1, pp. 59–69, 2016. [233] S. J. Kim, Y. H. Jo, W. S. Choi et al., “Biomechanical properties of 3-dimensional printed volar locking distal radius plate: comparison with conventional volar locking plate,” The Journal of Hand Surgery, vol. 42, no. 9, pp. 747.e1–747.e6, 2017. [234] H.-J. Kang, H.-S. Kim, S.-J. Kim, and J.-H. Yoo, “Osteosynthesis of symptomatic nonunions of type II fractures of the distal clavicle using modified locking T-plate and bone grafting,” Journal of Trauma and Acute Care Surgery, vol. 72, no. 2, pp. E14–E19, 2012. [235] M. D. Hendel, J. A. Bryan, W. K. Barsoum et al., “Comparison of patient-specific instruments with standard surgical instruments in determining glenoid component position: a randomized prospective clinical trial,” JBJS, vol. 94, no. 23, pp. 2167–2175, 2012. [236] R. J. Dallalana, R. A. McMahon, B. East, and L. Geraghty, “Accuracy of patient-specific instrumentation in anatomic and reverse total shoulder arthroplasty,” International journal of shoulder surgery, vol. 10, no. 2, p. 59, 2016. [237] R. P. Mulligan, F. M. Azar, and T. W. Throckmorton, “Generic targeting guides place revision glenoid components in more anatomic version than traditional techniques,” Journal of shoulder and elbow surgery, vol. 26, no. 5, pp. 786–791, 2017. [238] T. B. Edwards and B. J. Morris, “Chapter 29- humeral prosthetic positioning,” in Shoulder Arthroplasty (Second Edition), pp. 254–267, Elsevier, 2019. [239] T. W. Throckmorton, L. V. Gulotta, F. O. Bonnarens et al., “Patient-specific targeting guides compared with traditional instrumentation for glenoid component placement in shoulder arthroplasty: a multi-surgeon study in 70 arthritic cadaver specimens,” Journal of shoulder and elbow surgery, vol. 24, no. 6, pp. 965–971, 2015. [240] R. Vaishya, M. K. Patralekh, A. Vaish, A. K. Agarwal, and V. Vijay, “Publication trends and knowledge mapping in 3D printing in orthopaedics,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 194–201, 2018. [241] H. Lal and M. K. Patralekh, “3D printing and its applications in orthopaedic trauma: a technological marvel,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 260–268, 2018. [242] M. Javaid and A. Haleem, “Additive manufacturing applications in orthopaedics: a review,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 202–206, 2018. [243] V. Bagaria, R. Bhansali, and P. Pawar, “3D printing-creating a blueprint for the future of orthopedics: current concept review and the road ahead!,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 207–212, 2018. [244] B. Boonen, M. G. Schotanus, B. Kerens, F.-J. Hulsmans, W. E. Tuinebreijer, and N. P. Kort, “Patient-specific positioning guides for total knee arthroplasty: no significant difference betweenfinal component alignment and pre-operative digital plan except for tibial rotation,” Knee Surgery, Sports Traumatology, Arthroscopy, vol. 25, no. 9, pp. 2809–2817, 2017. [245] A. Frisoli, M. Solazzi, M. Reiner, and M. Bergamasco, “The contribution of cutaneous and kinesthetic sensory modalities in haptic perception of orientation,” Brain research bulletin, vol. 85, no. 5, pp. 260–266, 2011. [246] F. Auricchio and S. Marconi, “3D printing: clinical applications in orthopaedics and traumatology,” EFORT open reviews, vol. 1, no. 5, pp. 121–127, 2016. [247] J. W. Kim, Y. Lee, J. Seo et al., “Clinical experience with threedimensional printing techniques in orthopedic trauma,” Journal of Orthopaedic Science, vol. 23, no. 2, pp. 383–388, 2018. [248] J. Guarino, S. Tennyson, G. McCain, L. Bond, K. Shea, and H. King, “Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis,” Journal of Pediatric Orthopaedics, vol. 27, no. 8, pp. 955–960, 2007. [249] J. Arnal-Burró, R. Pérez-Mañanes, E. Gallo-del-Valle, C. Igualada-Blazquez, M. Cuervas-Mons, and J. VaqueroMartín, “Three dimensional-printed patient-specific cutting guides for femoral varization osteotomy: do it yourself,” The Knee, vol. 24, no. 6, pp. 1359–1368, 2017. [250] A. M. Al-Sadi, F. A. Al-Oweisi, S. G. Edwards, H. Al-Nadabi, and A. M. Al-Fahdi, “Genetic analysis reveals diversity and genetic relationship among Trichoderma isolates from potting media, cultivated soil and uncultivated soil,” BMC microbiology, vol. 15, no. 1, pp. 1–11, 2015. [251] D. M. Gibbs, M. Vaezi, S. Yang, and R. O. Oreffo, “Hope versus hype: what can additive manufacturing realistically offer trauma and orthopedic surgery?,” Regenerative medicine, vol. 9, no. 4, pp. 535–549, 2014. [252] M. Salmi, J. Tuomi, K. S. Paloheimo et al., “Patient-specific reconstruction with 3D modeling and DMLS additive 26 BioMed Research International [224] Y. S liman, A. H. Feibus, and N. Baum, “3D printing and its urologic applications,” Reviews in urology, vol. 17, no. 1, pp. 20–24, 2015. [225] M. Colaco, D. A. Igel, and A. Atala, “The pote tial of 3D printing in urologi al research a d patient care,” Nature Revi ws Urology, vol. 15, no. 4, pp. 213–221, 2018. [226] V. Lemarteleur, M. Peycel n, J.-L. Sablayrolles, P. Plaisance, A. El-Ghoneimi, and P.-F. Ceccaldi, “Realization of open software chain for 3D mo eling and printing of organs in simulation c nters: example of renal pelvis reconstr ction,” Journal of Surgical Education, vol. 78, no. 1, pp. 232–244, 2021 [227] D. M. Cheriachan, M. DiPaola, J. P. Ianno ti, and E. T. Ricchetti, “3D printing in orthopedics—upper extremity arthropl ty,” in 3D printing in orthopae ic surgery, pp. 151–169, Elsevier, 2019. [228] D. Santoro, S. Tantavisut, D. Aloj, and M. D. Karam, “Diaphyseal steotomy after ost-traumati malalignment,” Current reviews in mu culoskeletal medicine, vol. 7, n . 4, pp. 312– 322, 2014. [229] J. Miyake, T. Murase, K. Oka, H. Moritomo, K. Sugamoto, and H. Yoshikawa, “Computer-assisted corrective osteotomy [238] T. B. Edwards and B. J. Morris, “Chapter 29- humeral prosthetic positioning,” in Shoulder Arthroplasty (Second Edition), pp. 254–267, Elsevier, 2019. [239] T. W. Throckmorton, L. V. Gulotta, F. O. Bonnarens et al., “Patient-specific targeting guides compared with traditional instrumentation for glenoid component placement in shoulder arthroplasty: a multi-surgeon study in 70 arthritic cadaver specimens,” Journal of shoulder and elbow surgery, vol. 24, no. 6, pp. 965–971, 2015. [240] R. Vaishya, M. K. Patralekh, A. Vaish, A. K. Agarwal, and V. Vijay, “Publication trends and knowledge mapping in 3D printing in orthopaedics,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 194–201, 2018. [241] H. Lal and M. K. Patralekh, “3D printing and its applications in orthopaedic trauma: a technological marvel,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 260–268, 2018. [242] M. Javaid and A. Haleem, “Additive manufacturing applications in orthopaedics: a review,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 202–206, 2018. [243] V. Bagaria, R. Bhansali, and P. Pawar, “3D printing-creating a blueprint for the future of orthopedics: current concept 26 BioMed Research International software chain for 3D modeling and printing of organs i simulation centers: example of renal elvis reco struction,” Journal of Surgical Education, vol. 78, no. 1, pp. 232–244, 2021. [227] D. M. Cheriach , M. DiPa la, J. P. Iannotti, and E. T. Ricchetti, “3D printing in rthopedics— pper extremity arthropl sty,” in 3D printing in o thopaed c surgery, pp. 151–169, Elsev er, 2019. [228] D. Sant r , S. Tantavisut, D. Aloj, and M. D. K ram, “Diaphyseal osteotomy after post traumatic malalignment,” Current reviews in musculoskeletal medic e, vol. 7, no. 4, pp. 312– 322, 2014. [229] J. Miyake, T. Murase, K. Oka, H. oritomo, K. Sugamoto, and H. Yoshikawa, “C mputer-assisted corrective osteotomy for malunited diaphyseal f rearm fractures,” JBJS, v l. 94, no. 20, p. e150, 2012. [230] D. A. Storelli, A. S. Bauer, L. L. Lattanza, and H. R. McCarroll, “The use f computer-aided design a d 3-dimensi nal models in the treatment of forearm malunions in children,” Techniques i hand & upper extremity surgery, vol. 19, no. 1, p. 23–26, 2015. [231] S. P. Steinmann and J. E. Adams, “Scaphoid fractures and nonunions: diagnosis and treatment,” Journal of Orth paedic Science, vol. 11, o. 4, pp. 424–431, 2006. [232] A. Schweizer, F. Mauler, L. Vlachopoulos, L. Nagy, and P. Fürnstahl, “Computer-assisted 3-dimensional reconstructions of scaphoid fractures and nonunions with a without the use of patie t-specific guides: early clinical outcomes and postoperative assessments of reconstruction accuracy,” The Journal of Hand Surgery, vol. 41, no. 1, pp. 59–69, 2016. [233] S. J. Kim, Y. H. Jo, W. S. Choi et al., “Biomechanic l properties of 3-dimensional printed volar locking distal radius plate: comparison with conventional volar locking plate,” The Journal of Hand Surgery, vol. 42, no. 9, pp. 747.e1–747.e6, 2017. [234] H.-J. Kang, H.-S. Kim, S.-J. Kim, and J.-H. Yoo, “Osteosynthesis of symptomatic nonunions of type II fractures of the distal clavicle using modified locking T-plate and bone grafting,” Journal of Trauma and Acute Care Surgery, vol. 72, no. 2, pp. E14–E19, 2012. [235] M. D. Hendel, J. A. Bryan, W. K. Barsoum et al., “Comparison of patient-specific instruments with standard surgical instruments in determining glenoid component position: a randomized rospective clinical trial,” JBJS, vol. 94, no. 23, pp. 2167–2175, 2012. [236] R. J. Dallalana, R. A. McMahon, B. East, a d L. Geraghty, “Accuracy f patient-specific instrumentation in anatomic and reverse total shoulder arthroplasty,” International journal of shoulder surgery, vol. 10, no. 2, p. 59, 2016. [237] R. P. Mulligan, F. M. Azar, and T. W. Throckmorton, “Generic targeting guides place revision glenoid components in more anatomic version than traditional techniques,” Journal of shoulder and elbow surgery, vol. 26, no. 5, p. 78 –791, 2017. vol. 24, no. 6, pp. 965–971, 2015. [240] R. Vaishya, M. K. Patralekh, A. Vaish, A. K. Agarwal, and V. Vijay, “Publication trends and knowledge mapping in 3D printing in orthopaedics,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 194–201, 2018. [241] H. Lal and M. K. Patralekh, “3D printing and its applications in orthopaedic trauma: a technological marvel,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 260–268, 2018. [242] M. Javaid and A. Haleem, “Additive manufacturing applications in orthopaedics: a review,” Journal of clinical orthopaedics and trauma, vol. 9, no. 3, pp. 202–206, 2018. [243] V. Bagaria, R. Bhansali, and P. Pawar, “3D printing-creating a blueprint for the future of orthopedics: current concept review an the road ahead!,” Journal of clinical orthopaedics and trauma, v l. 9, no. 3, pp. 207–212, 2018. [244] B. Boonen, M. G. Schotanus, B. Kerens, F.-J. Hulsmans, W. E. Tuinebreijer, and N. P. Kort, “Patient-specific positioning guides for total knee ar hroplasty: n significant difference betweenfinal component alignment a d pre-op rative digital plan except f r tibial rotation,” Kne Surgery, Sports Traumatology, A throscopy, vol. 25, o. 9, pp. 2809–2817, 2017. [245] A. Frisoli, M. Solazzi, M. Reiner, and M. Bergamasco, “The contribution of cutaneous and kinesthetic sensory modalities in haptic perception of orientation,” Brain research bulletin, vol. 85, no. 5, pp. 260–266, 2011. [246] F. Auricchio and S. Marconi, “3D printing: clinical applications in orthopaedics and traumatology,” EFORT open reviews, v l. 1, no. 5, pp. 121–127, 2016. [247] J. W. Kim, Y. Lee, J. Seo et al., “Clinical experience with threedimensional printing techniques in orthopedic trauma,” Journal of Orthopaedic Science, vol. 23, no. 2, pp. 383–388, 2018. [248] J. Guarino, S. Tennyson, G. McCain, L. Bond, K. Shea, and H. King, “R pid prototypi g technology for surgeries of he pediatric spine and pelvis: benefits analysis,” Jo rnal of Pediatric Orthopaedics, vol. 27, no. 8, pp. 955–960, 2007. [249] J. Arnal-Burró, R. Pérez-Mañanes, E. Gallo-del-Valle, C. Igualada-Blazquez, M. Cuervas-Mons, and J. V queroMartí , “Thr e dimensional-p inted patient-specific cu ti g guides for fem r l varization steo omy: do it yourself,” The Kne , vol. 24, no. 6, p. 1359–1368, 2017. [250] A. M. Al-Sadi, F. A. Al-Oweisi, S. G. Edwards, H. Al-Nadabi, and A. M. Al-Fahdi, “Genetic analysis reveals diversity and genetic relationship among Trichoderma isolates from potting media, cultivated soil and uncultivat d soil,” BMC microbiology, vol. 15, no. 1, pp. 1–11, 2015. [251] D. M. Gibbs, M. Vaezi, S. Yang, and R. O. Oreffo, “Hope versus hype: w at can additive manufacturi g realistical y offer trauma a d orthop surgery?,” Regenerative medicine, vol. 9, no. 4, pp. 535– 49, 2014. [25 ] M. Salmi, J. Tuomi, K. S. P loheimo et al., “Patient-specific reconstruction with 3D modeling and DMLS additive manufacturing,” Rapid Prototyping Journal, vol. 18, no. 3, pp. 209–214, 2012. [253] S. M. Peltola, F. P. Melchels, D. W. Grijpma, and M. Kellomäki, “A review of rapid prototyping techniques for tissue engineering purposes,” Annals of medicine, vol. 40, no. 4, pp. 268–280, 2008. [254] L. Maini, A. Sharma, S. Jha, and A. Tiwari, “Three-dimensional printing and patient-specific pre-contoured plate: future of acetabulu fracture fixation?,” European Journal of Trauma and Emergency Surgery, vol. 44, no. 2, pp. 215– 224, 2018. [255] G. Goodman and C. Engh Jr., “The custom triflange cup: build it and they will come,” The bone & joint journal, vol. 98, 1_Supple_A, pp. 68–72, 2016. [256] B. Sanghera, S. Naique, Y. Papaharilaou, and A. Amis, “Preliminary study of rapid prototype medical models,” Rapid Prototyping Journal, vol. 7, no. 5, pp. 275–284, 2001. [257] C. M. Robinson, “Fractures of the clavicle in the adult: Epidemiology and classification,” The Journal of bone and joint surgery. British volume, vol. 80, no. 3, pp. 476–484, 1998. [258] D. J. Sisto and V. K. Sarin, “Custom patellofemoral arthroplasty of the knee: surgical technique,” JBJS, vol. 89, 2_ suppl_2,, pp. 214–225, 2007. [259] D. L. Cohen, J. I. Lipton, L. J. Bonassar, and H. Lipson, “Additive manufacturing for in situ repair of osteochondral defects,” Biofabrication, vol. 2, no. 3, article 035004, 2010. [260] L. Meseguer-Olmo, V. Vicente-Ortega, M. Alcaraz-Baños et al., “In-vivo behavior of Si-hydroxyapatite/polycaprolactone/DMB scaffolds fabricated by 3D printing,” Journal of Biomedical Materials Research Part A, vol. 101, no. 7, pp. 2038–2048, 2013. [261] J. C. Reichert, A. Cipitria, D. R. Epari et al., “A tissue engineering solution for segmental defect regeneration in loadbearing long bones,” Science translational medicine, vol. 4, no. 141, p. 141ra93, 2012. [262] R. Vaishya, V. Vijay, A. Vaish, and A. K. Agarwal, “Threedimensional printing for complex orthopedic cases and trauma: a blessing,” Apollo Medicine, vol. 15, no. 2, p. 51, 2018. [263] Z. A. Starosolski, J. H. Kan, S. D. Rosenfeld, R. Krishnamurthy, and A. Annapragada, “Application of 3D printing (rapid prototyping) for creating physical models of pediatric orthopedic disorders,” Pediatric radiology, [268] A ex or [269] W J. di le no [270] J. tu an pp [271] D R gi vo [272] K in en [273] S. m ed no [274] N B fo ca 20 [275] L. is w m vo [276] N W re ne [277] J. su [278] R R re or ev BioMed Research International
RkJQdWJsaXNoZXIy MTExMDc1